Tank drain time (Torricelli)
Water leaves a hole as fast as if it had fallen from the surface. As the level drops the jet slows, so a tank takes longer to lose its last half than its first. The animation runs the whole drain in a few seconds and shows the real time.
The physics
- Torricelli's law: the jet speed is v = √(2 g h) for a depth h above the hole.
- The level: the tank loses what the hole lets out, A dh/dt = −Cd a √(2 g h), which gives h(t) = (√h₀ − (Cd a ÷ A) √(g ÷ 2) t)².
- Time to empty: t = (A ÷ (Cd a)) √(2 h₀ ÷ g). The depth halves after 1 − 1/√2 ≈ 29% of that time.
Cd = 100% is an ideal hole; real holes let out less (the jet narrows just outside a sharp-edged hole), so set it lower to match a tank you've timed. Tested: the formula against integrating the level step by step (packages/mechanics/test/fluids.test.ts).
Example
With tank diameter 30 cm, hole diameter 10 mm, starting depth 50 cm, discharge coefficient 100%: time to empty: 287 s (4.8 min); time to half the depth: 84 s; flow at the start: 14.8 L/min. Open this setup, then change one thing at a time.
Related: Siphon · Venturi meter · RC circuit