Gear generator
A free generator for a matching pair of spur gears: true involute teeth from the same tested model as our animations. Set the bores to fit your shafts and space the axles at the centre distance shown.
Using the files
- SVG and DXF are in millimetres at true size: import them into your CAD, slicer or laser software without scaling. Each gear has its outline, a bore circle and a centre mark.
- Print 1:1 opens a template sized in millimetres. Print at 100% ("actual size"), then measure the 50 mm scale bar to check your printer didn't resize it.
- Centre distance is (zA + zB) × module / 2. Mount the axles exactly that far apart.
- Backlash thins every tooth by that much at the pitch circle so the gears don't bind. For 3D-printed gears 0.1–0.2 mm is a common starting point; machined gears need less.
What the settings mean
Module is the tooth size: pitch diameter ÷ teeth. Two gears only mesh if they share the same module and pressure angle. Pressure angle sets the tooth shape: 20° is the modern standard, 14.5° is found on older gears, 25° gives stronger teeth. Each angle has a fewest number of teeth before the tooth roots must be cut back (undercut): 2 ÷ sin²α, which is 32 at 14.5°, 18 at 20° and 12 at 25°. The sliders stop there, so every gear is an exact involute.
Teeth are standard full depth: addendum 1 module, dedendum 1.25 modules, root corners left sharp. Check fit with a test print before relying on the gears in a machine.
Tested: with backlash the teeth never overlap and the flank gap is j·cos α, the minimum tooth count without undercut is 2/sin²α, the exported DXF and SVG are the tested outline in millimetres and the pair meshes, and the kit passes at every slider extreme for all three pressure angles (packages/mechanics/test/gears.test.ts, packages/mechanics/test/export.test.ts and packages/mechanics/test/kits.test.ts).
Related: Gear ratio · Planetary gears · Printable clock kit