Sprocket ratio and speed calculator

Enter the sprockets, the engine speed and the tyre size. Primary and gear ratios are optional (leave them at 1 for a direct chain drive).

The formula

Final drive = rear teeth ÷ front teeth. Overall reduction = primary × gear × final drive, so the wheel turns engine rpm ÷ overall times a minute, and road speed = wheel rpm × tyre circumference. The tyre diameter comes from its size: for 180/55-17 that's 17 × 25.4 mm of rim plus two sidewalls of 180 × 55%, 629.8 mm in all.

Changing sprockets changes road speed at a given rpm by (new front ÷ new rear) ÷ (old front ÷ old rear) − 1. Your bike's primary and per-gear ratios are in its service manual. Results are theoretical: tyres grow at speed and squash under load, and an engine may not reach a given rpm in top gear.

Tested: tyre sizes 120/70-17 (599.8 mm) and 180/55ZR17 (629.8 mm), and 15/45 sprockets with a 1.5 primary in a 1.0 gear at 9,000 rpm, against hand calculations (packages/mechanics/test/maker.test.ts).

Related: Go-kart gear ratio calculator · Speed from gear ratio · Chain length calculator