Rack and pinion

Pitch radius
Travel per turn
Rack speed

A rack is a gear unrolled into a straight line. Each turn of the pinion moves the rack by the circumference of its pitch circle.

The formula

Tested: travel per turn equals π m z for every slider setting (packages/mechanics/test/classics.test.ts). Teeth are drawn as simple blocks at the true pitch, not exact involute profiles.

Example

With module 2 mm, pinion teeth = 18, pinion speed 10 rpm: pitch radius: 18.0 mm; travel per turn: 113.1 mm; rack speed: 18.8 mm/s. Open this setup, then change one thing at a time.

Related: Gear ratio · Lead screw calculator · Worm drive