Beam deflection (simply supported, point load)
A beam on two supports sags under a load. How much depends on the span cubed, the load, the material's stiffness (E) and the shape of the section (I). Doubling the depth of a rectangular beam makes it eight times stiffer; doubling its width only twice.
The formulas
- Reactions: with the load P a from the left support and b = L − a from the right, Rleft = P b ÷ L and Rright = P a ÷ L.
- Bending moment: largest under the load, M = P a b ÷ L. Stress at the top and bottom faces: σ = M (h ÷ 2) ÷ I.
- Section: a solid rectangle b wide and h deep has I = b h³ ÷ 12.
- Deflection (from E I y″ = M, integrated twice with zero deflection at both supports): for x ≤ a, y = P b x (L² − b² − x²) ÷ (6 L E I). With the load at or right of centre (a ≥ b), the largest sag is at x = √((L² − b²) ÷ 3) from the left support, which is always in the longer part of the span; with the load in the middle it is P L³ ÷ (48 E I).
Linear elastic, small deflections, the beam's own weight left out, and the stress is from bending only. For a real structure use your building code's loads and limits. Tested: the reactions balance the load and its moment, and the deflection formulas match a direct numerical double integration of M ÷ E I to one part in a million for loads at three positions (packages/mechanics/test/science.test.ts).
Example
With span 4 m, load 10 kN, load position 50% of span, beam width 100 mm, beam depth 200 mm, Young's modulus E 200 GPa: largest deflection: 1 mm; where: 2 m from the left; deflection as a share of span: span ÷ 4,000; largest bending moment: 10 kN·m; largest bending stress: 15 MPa; support reactions: 5 kN left, 5 kN right. Open this setup, then change one thing at a time.
Related: Moment of inertia (sections) · Block and tackle · Coil spring rate calculator